(info retrieved 26-Mar-2012)

---
Dillon Precision Products, Inc.
8009 East Dillon's Way
Scottsdale, AZ 85260 U.S.A.
http://DillionPrecision.com/  

Call Toll Free 800.223.4570 
            or 480.948.8009
           Fax 480.998.2786 

   Two models below...
   $260  BL-550   'Basic Loader 550'
   $380  Square Deal B
   other presses, equip, tools, etc on their Webpages

/\/\/\
Dillon  BL-550   $260

BL 550 Basic Loader // Stock Number: 15399

The BL 550 is essentially an RL550B without the automatic priming and powder systems. Capable of loading more than 160 calibers- just like the RL550B- it uses any manufacturers' standard 7/8"-14 reloading dies. It's priced comparably with other manufacturers' turret presses; yet unlike them, it's fully upgradeable to Dillon's Progressive RL550B loader!

The interchangeable toolhead makes it quick, easy and inexpensive to change calibers. For example, if you load 30-06 for elk, .243 for deer and .22-250 for coyote, you don't even have to change the shellplate. You simply pull two pins and swap the toolhead with your 30-06 dies to another toolhead with your .22-250 or .243 dies in less than 30 seconds! The additional toolheads are $20.95 each, or $18.95 each if you buy three or more- if you load for several rifles it's a no-brainer! Once you get your dies set you'll never have to re-set them.

A powder measure adapter is available if you want to use a manual measure that you already own. Or, if you want to weigh every powder charge you load, it's easy- you can use a powder trickler with the powder die/ funnel assembly that comes with the BL550. 


/\/\/\
Dillon  Square-Deal  $380

Dillon  Square Deal 'B'
Stock Number: Dillon SDB

Square Deal B Auto-Indexing Reloader

4 Station Progressive Loader
  Station 1) resize/deprime
  Station 2) prime/powder drop/flare
  Station 3) seat
  Station 4) crimp

Lifetime "No-BS" Warranty
Loads only the listed handgun cartridges Automatic Indexing shellplate Auto Powder / Priming Systems Uses special dies Manually fed cases and bullets Typical loading Rate is about 300-500 Rounds per Hour Comes Complete With Factory Adjusted Loading Dies Ready-to-Use, machine set up with proper primer size & shellplate installed.

Machine pictured shows available options. 
These are not included with the base machine. 
Click "Options" folder to review the available options for this machine.

The Basic machine includes the following:

    1 machine
    1 powder measure with large and small powder bars (small installed)
      Small bar throws from  2.1 to 15 grains of powder 
      Large bar throws from 15   to 60 grains of powder
    1 priming system with large and small priming parts
    1 early warning buzzer and rod for primer system
    1 packet of tubes containing: 
        1 large, 
        1 small primer pickup tubes, 
        1 magazine tube, and 
        1 primer slide assembly, 
        1 powder measure failsafe rod assembly with bracket (13355)
    3 locator buttons
    1 toolhead
    1 powder die
    1 caliber conversion kit
    1 set of carbide dies (except for 44/40)
    1 Spent primer cup bracket, screws and cup
    1 loaded cartridge chute, screws and plastic bin
    1 written instruction manual

The Square DealB is only capable of loading the common straight walled 
    pistol cartridges, uses a proprietary drop-in insert style die, 
    and is a great compact reloader.

Machine height from bench is 18 1/2" 

---